eksmaster
Have you ever wondered why there are three slots or bolt holes in the steering shaft?
The stock position is to have the tie rods in the center slot or hole. 

If you have a driver that routinely turns in early at corners and has to correct or counter steer to complete the turn here is a TIP for you: IMG_3503.jpg 

Move the tie rods to the bottom slot or hole. This will slow down the steering making it easier for them to turn correctly. Always remember that any time you adjust any component of the steering you must adjust the Castor and Camber.

Happy testing!
Life is what happens to you while you're planning on doing something else.
Quote 0 0